The 4 stage Compact RO unit with DI includes:
1 x Sediment Pre-filter
1 x Carbon Pre-filter GAC Filter
1 x 50 US gallon per day membrane
1 x Fitting Kit
1 x Post DI Filter
1 x 1 Litre DI Resin
2 x 2.5 Housing Clips
Sufficient Tubing for standard installation
This Compact Reverse Osmosis Unit is a 4 stage water filter producing 50 Gallons of water per day which can provide water for Aquariums, Propagation of Plants and use in Pharmaceuticals it removes up to 99% of water contanimants.
This is a great little space saving RO System which can be made temporary portable by adding a 1/4 ball valve
to each tube (keeps system wet and prevents damage through drying). Just run a couple of litres off before gathering after the system has been not is use. The inline post DI filter comes seperate from the unit along with resin and clips for customers to attach to the system.
If you are looking for a system that is low priced rather than small please consider the 4 stage with DI RO Systems
as the filters are cheaper to replace in the long run.Replacement filter links:Replacement Carbon Filter 2.5"Replacement 5 micron Sediment Filter 2.5"Replacement 1 Litre DI Resin
This Compact Unit relies on specific water input needs to function as a proper reverse osmosis system, so please ensure to check the technical details and criteria information below before you purchase.
The effectiveness and productivity of RO systems increase with greater water pressure and temperature. The actual flow rate (in GPD) of any reverse osmosis system depends on your home water pressure and temperature.
Manufacturers recommend 60 psi is required at the membrane for full production, not everyone's cold water is at 60 psi and 77 degrees F; therefore, you might get less than 36 GPD, perhaps 50% or even less if your pressure and temperature are very low! Please consider these factors before you finally decide on which system is best for youTechnical Information
Operating Temperature 5C-45C
Operating pressure 15-125psi
50 Gallons per day RO Membrane
Virtually removes everything to provide pure water
Replacement filters readily available.
(stage 1) Pre Sediment Filter designed to remove particles, impurities from water
(stage 2) GAC made from granular carbon media designed to remove Chlorine & odour from water
(stage 3) RO Membrane Filter designed to remove, Heavy Metals, Pesticides, Hormones and Bacteria.
(stage 4) DI Filter Stage- Inline DI filter Pod withrequire 2.5" housing to housing clips (supplied separate for customers to add to the assembled system)
Dependant upon use of the unit, the 1-3 cartridge filters will need changing every 4-6 months, the membrane filter requires changing at approximately 18 months.All filters are in stock and can be purchased at any time. The need to change filters is dependant upon actual use and the quality of your water.Input water must meet the following criteria for proper Reverse Osmosis function:
Temperature must be less than 45 degrees Celsius
Iron content no more than 0.1 ppm
Water pressure must me a mimimum of 1 Bar PH not less than 3 and not more than 11
TDS under 1000 ppm recommended.People who bought this item also bought: